Dinghy Covers

All our covers are supplied where possible with a deep valance and eyelets around the base, with a base draw ord and/or webbing and buckle ties - depending on the dinghy in question. All covers are supplied in blue, but other colours are available upon request - possibly at an additional cost.

There are three main types of cover - many covers are made to standard patterns, these are generally available ex stock. Most covers produced today are for fibreglass dinghies made from a heavy weight reinforced PVC.

The less common dinghy covers - can be produced to your specific requirements or if patterns are not available a measuring chart can be provided. For traditional wooden dinghies or dinghies with wooden decks or similar it is not recommended to use a PVC cover but to have a breathable cover from either a Polyester Cotton material or an Acrylic material, both of which protect the varnish work better from the elements of frost, where these materials are more breathable than PVC

Flat Covers

A simple cover made to completely cover the top of the boat, with no mast or shroud cuts outs, but down the hull to where required.

Over Boom Cover

This is a cover that is made to cover the complete dinghy with the mast up, the boom in the gooseneck, giving a maximum water run off, with cut outs for the shrouds, mast, forestay etc.

Flat with Mast Up Covers

As described a flat cover with cut out for the mast, shrouds etc. Sometimes supplied with a tab, for the main halyard to be used to hold the cover up as much as possible so as water does not lie in the centre.

Standard colour us blue, all other colours are plus 10%.

Deliveries in the UK mainland £15. All prices include VAT.